Step 4: Select the width constraint, then set the size of 60mm. Step 3: Select the square/rectangle tool, then create a rectangle at the center of the canvas.ĭon't worry about the size now, we'll set up constraints in the next step. When creating the sketch, select the XY_Plane. You can use the shortcuts on the left sidebar to create a new body, and then create a new sketch on that body. Step 2: Create a new body, and then create a new Sketch. Step 1: Create a new project, then move to the Part Design workbenchĬreate a new project, then select the "Part Design" workbench on the workbench selection box. You can refer to the first post of this series for more details on how to navigate FreeCAD's user interface. In this guide, which is part 2 of a series about FreeCAD for beginners, we'll see how to use the Sketcher and Part Design workbenches to create a minimalist pen holder model that you can print with a 3D printer.īefore continuing with this post, it is important that you have FreeCAD installed on your machine, and that you are familiar with how to navigate the interface. In a nutshell, through the Sketcher workbench you create the blueprints of parts that are manipulated through the Part Design workbench. Sketcher and Part Design are two FreeCAD workbenches that work closely together, typically used to turn 2D geometries into 3D models. How to Create a Pen Holder on FreeCAD Using the Sketcher + Part Design Workbenches
0 Comments
Leave a Reply. |